Datapath x4 is a stand alone display video wall controller, that accepts a standard single or Dual-Link DVI-D input and can flexibly display this across for DVI-I outputs. Datapath x4 multi display controller can rotate, crop, scale, mirror and bezel correct images, allowing the user to utilize their creative imagination. The hardware equalization supports input cable lengths up to 20 metres Datapath x4 is ideal to construct multi screen solutions for both digital signage applications, small video walls and for any creative multi display video setup.
Supports Creative Monitor Arrangements
Each output monitor can take its input from any region of the DVI image, since all the required cropping, scaling, rotation and frame rate conversion is handled by the x4 hardware. These regions can overlap to allow any output to replicate another, or they can be configured to support any creative splice of the source material. This allows the support of many non-rectangular screen arrangements with uneven gaps, and any mix of orientations.
Dual Link video input will support high resolution pixel-perfect source images for display. The Datapath x4 display wall controller can additionally present a default native resolution to the source to allow still higher custom resolutions at reduced frame rate, but still remain within the capabilities of the Dual Link video interface. Most standard graphics card sources will output at this native resolution. Since the x4 will scale and frame rate convert, using a triple buffered capture architecture, the output monitors can still be driven at their preferred frame rates and resolutions.
Datapath x4 is a stand alone display wall controller features
Supports full bezel width and height correction for all types of displays
Ideal for use with edge blending projectors - supports image overlapping
Splits a Dual Link DVI, Single-Link DVI or HDMI* input (* HDMI input requires the optional DVI/ HDMI adapter)
The input EDID is programmable to allow arbitary input resolutions and frame rates
Flexibly drives multi displays, each from any selected region of the input image
Supports both DVI and analog RGB output monitors
Stand alone operation supports auto-detecting of input resolution and output monitor native resolutions. Output screen configuration is defined by internal non-volatile memory
Output configuration is programmable via a USB connection to a PC. Graphical utility allows easy control of cropping, scaling, rotation and gaps